Questions & Answers for: belt Vacuums

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

BELT TO THE BRUSH SEEMS TOO LOOSE EVEN WHEN REPLACED LOOSE BELT. THE BELT IS STILL LOOSE EVEN AFTER REPLACING Hoover U6437-900 U6439-900 Upright LOOSE BELT. THE BELT IS STILL LOOSE EVEN AFTER ...

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Belt Stretched on my Hoover Windtunnel Farrington upright model U6431-900 Roller brush was turning sporadically so I removed the bottom plate to see if belt(s) were broken only to find they are both ...

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Kirby g4 belt replacement How U do that? I see the ''belt on'' ''belt off'' signs. Cleaned out vacuum given to me by my Mom and don't know how to get the belt back on. HELP!>> Facing vacuum,turn belt ...

Question about Windtunnel Supreme U5280-900 Upright Vacuum

1 Answer

Installing belt How to install a belt on Hoover upright vacuum here are the step by step instructions from the owners manual for your machine. Disconnect cleaner from electrical outlet. WARNING: ...

Question about Windtunnel Supreme U5280-900 Upright Vacuum

1 Answer

MY VACUUM IS NOT PICKING UP IV BOUGHT NEW BELTS FOR IT I CANT FIGURE OUT WHERE THE SMALL BELT GOES...COULD YOU PLEASE LET ME KNOW WHERE IT GOES..... Hi This is quite complicated but I'll try and ...

Question about Windtunnel Supreme U5280-900 Upright Vacuum

1 Answer

how do I replace the drive belt in the hoover u6401? Remove the plate from the vacuum's underside. You will see fourscrews or two clips that attach the plate to the vacuum. Removingthe plate will give

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

2 Answers

I need to replace the belt. Have the belt and the vacuum bottom off. What do I attach the belt too? This unit has 2 belts. The V-belt on the brush usually doesn't cause problems. The larger flat belt ...

Question about Classic M08100 Bagged Handheld Vacuum

1 Answer

How to change belt on dirt devil handy zip Hello! Below are step by step instructions to replacing the belt on your hand vac. I have also included a link to the instruction manual which has pictures ...

Question about Classic M08100 Bagged Handheld Vacuum

1 Answer

How to replace handy zip belt ? Replace the belt Hello! Below are step by step instructions to replacing the belt on your hand vac. I have also included a link to the instruction manual which has ...

i was trying to replace my Kirby Vacuum's belt and when I turned it to belt on it didn't work but the hook hooked the belt when I turned it back to the belt off position! Help! Go to utube Before ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...