Questions & Answers for: Hoover belt

Ad

Question about Company Wind Tunnel U53019 Upright Vacuum

2 Answers

belt slipping Belt slips off and rubs causing burning smell from the belt over heating. Of course this puts an indent into the belt and has to be replaced. How do I keep the belt from slipping off? I ...

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

BELT TO THE BRUSH SEEMS TOO LOOSE EVEN WHEN REPLACED LOOSE BELT. THE BELT IS STILL LOOSE EVEN AFTER REPLACING Hoover U6437-900 U6439-900 Upright LOOSE BELT. THE BELT IS STILL LOOSE EVEN AFTER ...

Ad

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

Belt Stretched on my Hoover Windtunnel Farrington upright model U6431-900 Roller brush was turning sporadically so I removed the bottom plate to see if belt(s) were broken only to find they are both ...

Question about Windtunnel Supreme U5280-900 Upright Vacuum

1 Answer

Installing belt How to install a belt on Hoover upright vacuum here are the step by step instructions from the owners manual for your machine. Disconnect cleaner from electrical outlet. WARNING: ...

Question about U6630-900 WindTunnel Bagless Upright Vacuum

1 Answer

Beater Bar Belt loose and bar won't turn I also replaced the belts and bar stil won't turn due to loose drive belt. There appears to be no adjustment to tighten the belt. I'm considering cutting the ...

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

2 Answers

My Hoover U6439-900 also losing belts Vacuum is loosing drive belt when trying to perate on carpet. Belt stays on when I place it upside down and lat it run When upside down there is no resistance,on ...

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

1 Answer

how do I replace the drive belt in the hoover u6401? Remove the plate from the vacuum's underside. You will see fourscrews or two clips that attach the plate to the vacuum. Removingthe plate will give

Question about U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

2 Answers

I need to replace the belt. Have the belt and the vacuum bottom off. What do I attach the belt too? This unit has 2 belts. The V-belt on the brush usually doesn't cause problems. The larger flat belt ...

Question about Self-Propelled WindTunnel Bagless Upright VacuumVacuum

1 Answer

how to stop the main belt from comming off the motor shaft on a hoover modle u6634-900/windtunnel have replaced the belt,but it will not stay on Hello there! If you have replaced the belt and it is ...

Question about U6476-910 WindTunnel Upright Vacuum Cleaner Bagged Vacuum

2 Answers

how do I replace the smaller belt that attaches to the brush The smaller belt is too big for the brush. It is only looped around the brush and the larger drum. Is there any other loops it should be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Hoover Vacuum Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Kirk Thompson

Level 1 Expert

11 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...