Questions & Answers for: bellhousing bolt pattern

transmisson will a transmision for 2.9 liter fit a 3 liter No, the engine to tranny bolt patterns are different. Depending on the tranny, you may be able to swap the bellhousing to make it fit.

...bolt patterns on bellhousing to make sure there are no differences in bolt pattern but I believe they are the same. With a little work you could also stuff a 400 or a 700r4 (with overdrive) unit in ...

...Bellhousing bolt pattern is different. To the best of my knowledge they never put a 44Re behind the 4.0 If you are looking to upgrade, you could use some componets from the 44Re and install them in ...

...will swap and if anything is different. the only difference is the modulator pressure and the weight. The bolt patterns are the same. I would measure bellhousing to make sure it is exactly the

need to know if 4.3 from 85 el camino will bolt to 88 chev 1500 truck with manual tranny yes same bolt pattern on bellhousing for all 4.3 same as 5.7

bolt pattern at the adapter or tailhousing. Additionally, the removeable bellhousing is also another distinguishing feature. The Late 4L60-E transmission has a three piece case of cast aluminum alloy;

...bolt pattern on the bellhousing of the transmission will be slightly different.pontiac trans will dip down a little bit,and a chevy trans comes up to a slight point.so odds are,that you're going to ...

...Bolt Bellhousing Pattern vs. 5 Bolts for 221-260-289 V8's up until the end of 1967. All 302's, starting with the first year 302's have the 6 Bolt Bellhousing that's identical to the 351W, 351C, 300 ...

...bellhousing pattern are different. I am also not sure that the electronics would work either. Here is what they say: 3.0l Vulcan engine has a unique bolt pattern, doesn't cross over to any other ...

...bellhousing, converter cover, and transmission bolts/stud to 50 N?m ( ... transmission pan bolt pattern? Diesel Place https://www.dieselplace.com > ... > Allison OEM May 21, 2011 - transmission pan ...