Questions & Answers for: behringer replace fuse

Behringer pmp 3000 power mixer - can anyone tell me pleas Lyn DO NOT REPLACE A FUSE if it blows. You will do additional damage to the unit internally. When these blow, there is damage inside that must

...fuse holder for my Behringer pmp 3000 mixer The fuse did not blow, the fuse holder and the fuse dropped out when the mixer was in an upright position. I need replacements for these and cannot find ...

...BEHRINGER USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011 Tel.: +1 425 672 0816 Fax: +1 425 673 7647 I just repaired a PMP3000. A bit of warning on these. Do not let a speaker leads ...

...A behringer pmp powerred mixer 5000I lost the fuse located at rear...where could I find it and buy it? hello, tries websites like Shopjimmy.com,Ebay.com to buy parts for the replacement. Good

Behringer b215a powered speaker that will not power on. I have replaced all 3 fuses, to no avail. The speaker is discontinued, and the newer model is b215d. I would like to replace all the back casing

fuse. Behringer stuff is notoriously cheap and under-protected, so by the time the fuse blows it's usually more trouble than it's worth trying to fix. But maybe you'll be lucky and it will

...fuse for Behringer PMP2000 10 Channel Mixer If the fuse blew, you ARE going to need a lot more than a fuse as the cause is usually internal damage to the amp module and or power supply.  ...

behringer epa300 the fuse keeps blowing at the back of the amp so getting no power.i have changed the fuses, the power supply uses 2 x mosfet spa11n80 they are burnt out replace them. unit start at 80

Where can I buy a Behringer B615D fuse holder? Need (2) Are the fuse replacements 6.3/250v? Slow Burn? You may source it from Behringer com/service html or Ebay com

...behringer PMP3000 mixer is shout down during used and never turn it on again So,I doubt the fuse may blow up and can I just go buy the fuse to replace or something else Damage more inside please. ...