Questions & Answers for: beer keg cooler

Foamy Beer Just hooked up my keg and all I get is foam!!!!????!!! Help! was the keg shaken or handled rough at all before hooked up?, and how long has it been hooked up?

...beer backflow when you change the keg, provided the line going to the tap is empty (which usually is if keg is kicked). you may report the problem of taste of beer the store where bought it , byu the ...

...beer line and partial keg were frozen solid! I unplugged the cooler and opened the door to thaw out the system. plugged it back and and it was ok for a day...came back today and had the same LED ...

...beer ive just bought a danby chill'ntap keg cooler have the psi at 8 all i get is foam any ideas taste flat also Keg's are normally pressurized at 13 psi. If you only set yours at 8 psi then you are ...

...beer cooler doesn't keep the keg cold? ? ? It's refrigerate is r12 cooled. Do you think I could just re charge the coolant and that would be a solution? ? ? You would need to be a certified ...

...have tips on controlling excessive foam issues?.....Rich how cold is the beer?,too cold and it will foam,can you control the CO2 pressure???too high and it will foam, or you may have a bad keg of ...

...keg beer under 48 degrees, even at I have a new Summit sbc-500 and can't get my keg beer under 48 degrees, even at max cooling. Beer leaving tap is 50 degrees and I'm worried about secondary ...

...and bad start components on it. Start there. There is 2 kind of compressor location on those beer coolers. I have video of both. Hope that

...that runs to the bottom of the keg inside and u push air into the keg to push beer thru that tube and into a cool glass and down to ur gulletbut it sounds like u have a defective keg or an empty ...

...Beer keg and lines freeze. Display panel has temp display but cannot make temp inputs or change C/F. Sometimes displays "LE". Powered off several times. Any ideas? Do I have a display panel ...