Questions & Answers for: bed 06 chevy colorado

...06 chevy colorado idles rough when coming to a stop. Sometimes the truck stalls when this happens. No check engine light. I had the same exact problem on my 2004 Colorado (3.5L). Cleaned the MAF ...

...bed of my 2006 chevy colorado. I have the haynes manual and I can't seem to find them. Can anyone help me? Torque specs are not important in this application, apply some thread locking compound and ...

...bed on my 2006 chevy colorado attach to the frame? Do bolts just screw into nuts that are welded to the bed? Yes it is connected with shoulder bolts and nuts up inside the frame. Some have star bolts ...

06 chevy colorado engine light came on I have a 06 chevy colorado , coming home today after work ( 20 miles ) my engine light came on. It still runs fine just wondering why is it on . any advice would

...06 chevy colorado autozone rents the tensioner tool a 3/8 inch socket driver works great, just put the ratchet head in the hole for the adjustment and swing it off to the side, and the belt slips ...

chevy colorado won't start if i disconnect the battery then hook it reconnect after a couple minutes it will start what is causing this How often is this happening? Did you hear the alarm go off?&

...chevy colorado that has ignition starting issues? The truck won't crank up at times ; at other times there is a grinding sound when it is cranking, and occasionally it will continue cranking even if ...

Where is the purge valve in a 2008chevy colorado On the intake manifold on the left side.

how do you reset the passlock on a 2006 2.8 chevy Colorado? Turn the key on for 10 minutes, off for 30 seconds. Reset. There is a relearnalso. It is three times this. start on the third time.

...chevy Colorado goes up an slight incline it jerks when kicking in high gear. Could this be the torque sensor that makes the truck jerk? When going up a steep hill it does fine. check the vacuum ...