beater bar belt too loose My beater bar v-belt doesn't seem to get tight enough when engaged. The beater bar slows or stops when it contacts the carpet, and as a result the flat drive belt spins ...
Question about DC14 All floors Bagless Upright Cyclonic Vacuum
...beater bar. If you can remove the sole plate (which is the grid in front of the beater bar) then undo it and check dirt behind the beater bar, belt and main dust channel. Also check the main ...
Question about U6630-900 WindTunnel Bagless Upright Vacuum
Beater Bar Belt loose and bar won't turn I also replaced the belts and bar stil won't turn due to loose drive belt. There appears to be no adjustment to tighten the belt. I'm considering cutting the ...
Question about U6630-900 WindTunnel Bagless Upright Vacuum
...beater bar side up. The base plate has to come off; it is held on with either screws or clips or a combination of both. Once the base plate is off, you'll need to carefully remove the beater bar, ...
Question about U6630-900 WindTunnel Bagless Upright Vacuum
...beater bar on my Dyson won't turn. The vacuum runs and suctions but the bar won't turn and the belt is not broke. The beater bar did get a carpet fiber caught and wrapped around it which stopped the ...
beater bar is stuck. Need to take off the cover where the beater bar is and inspect it-first thing-is the belt there, and if so, is it worn, loose, broken? If you DON'T see the belt wrapped around the
Question about DC17 Animal Bagless Upright Cyclonic Vacuum
...beater bar seems to have worn and is loose. (very noisy) the vacuum still works but the beater bar rattles. Not sure how I can help, as it seems you know what the problem is! Fit a new brush bar! On ...
...to turn off the beater bar it turns off my vacuum. Help? There is a linkage between the on/off and the beater bar switch that probably has came loose or is broken. It also could be wires shorting
Question about S7000 S7210 Twist Upright Vacuum Cleaner with 1200-Watt Vortex Motor, 5.45 Quart AirClean Dustbag, Dual Motor System, SwivelNeck Maneuverability, Automatic Brush Height Adjustment and Suction Control
Beater bar stopped turning after bottom plate removed While vacuuming, I got speaker wire caught in the beater bar (don't ask). Caught tight enough, had to remove the bottom plate to untangle ...
Question about S7000 S7210 Twist Upright Vacuum Cleaner with 1200-Watt Vortex Motor, 5.45 Quart AirClean Dustbag, Dual Motor System, SwivelNeck Maneuverability, Automatic Brush Height Adjustment and Suction Control
...beater bar belt is not being engaged by the spinning bar off the motor. The belt remains loose despite the controls being in position to start the beater bar moving. The spindle is spinning so the ...
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions
