Questions & Answers for: basket drive

Ad

...basket drive and the drive block will need replacing. The nut that holds the basket to the drive block may have come loose causing the drive block to 'jump' over and damage the tabs on the basket ...

Ad

Question about Ultimate Care II LSQ9564J Top Load Washer

2 Answers

basket drive has slipped down. Grab the large, white, plastic piece on the basket drive, rotate (to release the break pads) and push up at the same time to seat the basket drive in the proper position

Ad

Question about LSQ8000 Top Load Washer

1 Answer

Basket drive? Are they hard to replace? John, it's possible that it could be the basket drive. It sounds more like the clutch assy. Take the agitator off and look at the drive block. The two ears from

Question about GSC9455 Top Load Washer

1 Answer

...basket drive I would stop useing it before you create damage to the basket drive. take the agetator off. sometimes they have a dispenser for fabric softner take it off or it will just have a cap ...

basket drive block is worn. If it looks like the basket drive block has slid down the brake & drive tube (I believe you're calling it the spindle), it's definitely worn out. When this part is in place

Question about LSR5132PQ Top Load Washer

1 Answer

basket drive block is worn and needs to be replaced. (The basket drive block is located on the gearcase drive shaft, under the tub and agitator) If this has been happening for a long time you may need

Question about LSR5132PQ Top Load Washer

1 Answer

basket off the drive block I'm replacing the drive block on my Kenmore model 70 washer, but I'm having trouble getting the spin basket off of the drive block (assuming that's my next disassembly step)

Question about LSR7333 Top Load Washer

1 Answer

...basket drive...no luck. What could it be? its possible the ears on the top of the drive tube have worn alowing the basket drive block to slip and not turn the clothes basket with authority, or the ...

Question about 24032\24036 Top Load Washer

1 Answer

...basket drive tube,around the clutch brake area! my machine would not spin and i found out the bottom of the basket drive tube had been ground off by the thrust washer which resulted in the clip that ...

...basket drive block. The drive block is attached to the top of the spin tube-basket drive assembly under the inner basket. The spanner nut is under the agitator, locking the basket to the spin tube. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...