Questions & Answers for: baracuda pool cleaner not moving

...cleaner and get it pulsing/moving strongly. Refer to the G4 manual for an illustration and explanation on how to do ...

baracuda, but it still does not move around the pool, can fill the suction if I lift it up, but it does not move. If you have good suction at the head you may have a bad diaprham or something stuck in

...baracuda G3 stop working is not pulsating and therefore not moving. I checked the suction and the hoses even the diaphram everything looks ok. If you have suction at the bottom of the cleaner, there ...

...moving on bottom of pool These pool cleaners should have an easy to correct solution when it comes not moving properly. Ensure that the main drain and all suction lines are closed except the one that ...

...Baracuda G3 moves very slowly then stops There are no blockages and the pressure is good Check your pool cleaners hose to make sure that it is not becoming tangled. Storing the hose in a coiled ...

baracuda alpha 3 has suction but will not move makes a humming noise. Their is probally a small hole or tear in your diaprham and will need replacement. If you take it to a pool store they will ...

...to redirect the returns in the pool. If they are angled right (or wrong) they will get a current moving in the pool and cause the cleaner to go to one spot and keep it in just that area of the

pool cleaner to find out why it is not moving. Make sure that your pump basket and filter are clean and not clogged. Check the diaphragm for blockage or damage. Use your Pool Pulse to determine proper

...stop moving. Use Pool Pulse to insure proper flow through the cleaner. Clean baskets and filter to ensure that you are not clogged. Check hose sections for leaks by lifting each section above