Questions & Answers for: baracuda g3 pulsating

Stops midway on side of pool and although pulsating stops it stays there. If power is turned off momentarily it drops to bottom of pool and continues cleaning when power is switched back on. Sounds ...

...baracuda G3 stop working is not pulsating and therefore not moving. I checked the suction and the hoses even the diaphram everything looks ok. If you have suction at the bottom of the cleaner, there ...

...g3 baracuda I have suction, but no movement, when I place my hand over the mouth it creates the pulsating movement until my hand is removed, then back to suction only, no movement A small rip or tear ...

...g3 i hear it pulsating but i looks like it has too much suction and it gets stuck and does not move how do i adjust it You need to use your pool cleaners flow gauge to test for proper flow. Keeping ...

my cleaner keeps stopping all the time. Is it pulsating? If not then either you don't have enough suction or the diaphragm is bad or clogged. Very common to have a **** or tear next to or just below ...

...pulsating. The pressure feels good on my hand. Use Pool Pulse to ensure proper flow. It could feel ok on your hand, but you need very precise pressure to power these pool cleaners. If you are not ...

Baracuda G3 pulsates, but does not move. I have checked the hoses and replaced the diaphragm along with the pool filters. It is only a little over one year old. I can hear it pulsating, but when I ...

...G3 Baracuda pool cleaners not moving, there are a couple things that you want to check. One of these problems is probably causing the lack of movement. Check for proper waterflow. If the water is 60 ...

my barracuda is not moving and i fell is not pulsating eather why? If your pool cleaner is moving slowly and not pulsating, there are a couple things that you will want to check and/or adjust. Make ...

...Baracuda G3 Pool Cleaner and it seems to be pulsating a little too excessively. Is this something that is typical? Or is there something wrong with the cleaner? rilly tipicle there should be a relief ...