Questions & Answers for: ball joint removal chevy silverado

...ball joint (2001 Silverado 1500) I am replacing the upper ball joint on my 01 Silverado and I need some advice. I have replaced ball joints on older model chevys but this one looks different so I ...

...ball joint 2001 chevy silverado 2500 hd 4x4 i am having trouble removing the lower ball joint The reason is they are pressed in and you have to press them out with a tool and some have a C clip that ...

...ball joint press remover and installer tool (at schucks you get money back when you bring it back) if it's 4 wheel drive you will have to remove the axle shaft next pull the snap ring off on the top ...

...ball joint broke off of socket on 97 chevy pickup how difficult is this to replace? if its original its not that bad just have to cut the rivets of the old ball joint body and remove it from the ...

...silverado 2500 4x4 replace lower ball joint If it has not ever been changed it is rivited in and must be removed with a flat sharp chissel or cut off wheel and pounded through. The new one bolts

...shock bolt removed, upper and lower ball joint seperated (book will say only one but it is not true) and steering knuckle and axle nut removed. CV joint simply unbolts at differential output

...was blown i replaced box with reman from advance auto about $200.00 and flushed system , drove great problem solved . could be a bad ball joint (i think on the left side if its hard to the

...ball joint broke and i need to replace it. How do i take it off and put a new one in.(do i need a ball joint press) 98 Chevy Silverado 1500 jack up the the side with the broken ball joint under the ...

...ball joint loose just take the nut off apply some upwards pressure and hit spindle with hammer and it will allow you to move the hub and all out enough to remove axle. the upper ball joint nut has to ...

...ball joint wear spec 2005 Silverado 2wd There are several different wear specs regarding lower ball joints. The official manufacturer torque spec. for lower ball joint wear (For your truck) is 5 in ...