Question about WF218ANW 4.0 cu. ft. High Efficiency Front Load Washer
...balls use centrifugal force and automatically move to the opposite side of where the load is unbalanced and balances it out. It is only in the washing machines, not dryers. This post is not a ...
Question about WF328AA Front Load Washer
...Samsung Washing Machine; 6.5Kg/3.0Kg Washer-Dryer model WD7652C8W, is going into spin(wet load),the drum starts making a banging noise, and there is lot of vibration of the machine. But after about ...
balance the load properly. Furthermore; even if everything appears to be in place, as the appliance ages, the springs or pistons/shock absorbers, may begin to wear out and not support as much weigh as
...samsung dryer front loading. it seems that the dryer is not balanced as it wobbles while drying. today the noise got worse, until i pulled the drum toward me then it went back to just wobbling. is it ...
...Samsung washer/dryer....on the spin cycle it starts to shake really bad and moves the machine 5 inches or more. did something come off balance installing this? Did you remove the shipping bolts for a ...
...Samsung dryer has developed an issue that wont allow the drum to turn after removing top panel I noticed that belt on my dryer is not running in what appears to be the intended area on the drum ...
Question about WF328AA Front Load Washer
SAMSUNG TOP LOAD WASHER (ONLY 3 MTHS OLD) WILL NOT COMPLETE SPIN CYCLE. IT STOPS BEFORE GETTING TO FULL SPEED, REPORTS AN OFF BALANCE ERROR CODE. IMPOSSIBLE TO BALANCE - FROM TOWELS, SHEETS, REGULAR ...
Question about High-efficiency Top Load Washer And Dryer Wa456drhdwr Dv456ewhdwr
...balance. I would guess that the bearing is loose or bad.If you lay it on its side you should be able to see whats wrong I searched for repair instructions for your washer with no results but did find ...
Question about DV5451AEW Dryer
Makes Loud Roaring Noise Driving Dryers Problems with vibration several things to check, the balance of the legs, the rollers or pulley, the tensioner and the belt, and lets hope not the bearings? ...
Question about 4.8 Cu. Ft. HighEfficiency TopLoad Washer And 7.4 Cu. Ft. Steam Electric Dryer
...and spins but the clothes are stuck to the sides but are still wet. I have already calibrated and balanced the washer and it worked fine before the pump so I didn't know if this is related to ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
