Questions & Answers for: bake probe flashing

...probe and the bake light. The probe is not connected. I unplugged the stove overnight but the problem returned after plugging it in. I had the same problem today (my wife overflowed a pot of chicken ...

...bake probe keeps flashing. No probe inserted. the control bord may be bad or the receptical where the probe connects may be bad and grounding out agenst the body of the oven. I would remove the plug ...

...work a little better... otherwise a new ignitor ( Ours is gas )... now it is flashing the probe and bake lights alternately and will not turn the oven on at all.... not so impressed at this

...probe and bake the probe and bake are flashing with a sound and baking will run for for 5 mins then it will stop. I had the same problem and pulled off the contorl panel and removed the ribbion ...

...probe it still beeps then the whole oven shuts off in the middle of cooking. I try to bake again but still within a few minutes will beep again and well just turns into a cycle. What is the deal with ...

Probe and Bake blink alternately. This is a JGB920 gas range. The "bake" and "probe" lights blink alternately. If you set it to "bake", the "probe" light flashes and the stove beeps. Is there any way ...

bake range over tempature error. First try disconnecting the power to the range for more than 10 minutes and see if the error re-appears. If it does then you will need to test the tempature probe with

probe and bake is blinking onmy ge oven how do I stop it ? I had the same problem today (my wife overflowed a pot of chicken stock last night, so there was liquid all over the cook-top, and some ...

...Bake cycle. Target probe temp will hit 100 in minutes, Open door, Take out Probe. Your done - solved! I think this started when I accidently tapped Probe when setting up the Bake cycle. With no Probe ...

...flashing the word probe and beeping every time I set a baking temperature. There seems to be no issue with the oven other than the beeping is annoying. I tried replacing the temperature sensor but ...