Questions & Answers for: bad struts cause grinding noise

Question about 1997 DeVille

1 Answer

...bad. The noise wasnt like when your low on steering fluid it was like a low grindy bumpy like rolling a r off your tongue noise but loud. the steering is getting a little hard but I can still turn ...

Ad

struts max 400 all four. Thats 800 you paid?????? Anyway. Bearings do not creak, if a bearing is bad you will either hear something similar to hum, hum, hum noise and if they are realy bad it would be

Ad

...sound. Raise the car, remove the wheel, and check the clearance between the dust cover and the rotor. If your shocks/struts are bad the tire could be rubbing against the strut. Check the

Question about 1998 Ranger SuperCab

1 Answer

...bad, would this cause the noise? Should I quit driving it until it is fixed? Usually the strut bearing will make this noise upon turning a corner and hitting a rut or pot hole when turning. A wheel ...

Question about 1997 Continental

1 Answer

grinding noise. That is the best example i can think of. I looked under front and noticed CV boot ripped and grease everywhere. So i took it in to a repair shop and had a full vehicle inspection done.

Question about 2001 Corolla

1 Answer

...TO THE WHEEL PUT YOUR HAND ON THE STRUT BASE AND SPIN THE TIRE WITH YOUR OTHER HAND YOU SHOULD FEEL A GRINDING NOISE. IF SO THE WHEEL BEARING ON THAT PARTICULAR SIDE IS BAD AND IT NEEDS TO BE ...

...struts or control arm bushings are bad and need further inspection. Take the car home to continue the inspection. 2 Raise the front of the car with the floor jack and position the jack stands under ...

...cause this. Squeek over bumps could be bad strut or it could be related to the harsh grinding noise going around turns. That is indicative of a bad CV joint or wheel bearing. Raise car on side noise ...

...remove tire an check the upper and lower ball joints as well as the shock/strut but check brakes grinding can also mean pads are metal to rotor but usually grinding and thumping is related to a bad ...

Question about 2005 Grand Prix

1 Answer

...cause pads to move around in the caliper sometimes before starting to grind. Finally, and what I think you're hearing/feeling is the CV Shaft. Grab shaft, move around feeling for excessive play in ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...