Questions & Answers for: bad coil

car turns over but i have no sprk at the coil? no spark at coil it could mean you have a bad coil, or a bad coil wire, or a bad distributor cap, but most likely its the coil itself.

Ad

...coil goes bad, just replace coil 1983 Porsche 944 coil goes bad, just replace coil and ran great then 4 days later coil is bad again. What would caue the coil to go bad What do you mean by bad? Does ...

Ad

...bad coil. To see if the coil is bad use a spark tester on the coil. It should jump a 3/8 inch gap no problem with a strong blue spark. If it doesn't swap that coil with another cylinder. If the coil ...

Question about 1998 F150 Regular Cab

1 Answer

...power going into coil and no spark coil is new was running fine changed spark plug wire and coil no spark to dist could be a bad coil wire from coil to dist. or a bad coil. have got bad coils

Question about 1998 F150 Regular Cab

2 Answers

...bad coil ( or coil pack) if no wires, Bad fuel injector..I would start in the order I listed. Most likely the coil is bad for that cylinder. You can swap coils and if the miss goes to the other ...

Question about 1990 Prizm

2 Answers

...spark directly at the coil, if coil HV output is zero. then bad dizzy cmp then bad ignitor then bad coil or bad ecu. there is a test for each, do you have tools? ignition coil bad, distributor ...

...coil 1 is bad,, from a pure tech stand point its. 1: bad coil (open or shorted) bad wires, open or shorted or bad ECU. we never condemn any ECU unless we do the simple lamp tests. etc. case in point ...

...coil goes bad will the bike still run down the road If a coil went bad would it still run down the road would depend on how it went bad. Usually if a coil goes bad it will not work at all anymore but ...

Question about 2005 Boulevard C90T

1 Answer

...coil is bad,or the ignitor shorted, EFI means Electronic Fuel injected. if no EFI or some old carb car real old? (to long points dwell time) wrong coil, bad coil coil start up resistor was by passed ...

bad coil. primary is of coil (ignitor end) is about 5 to 12ohms. (infinity bad) secondary coil is high ohms 1000 to 10000, par, infinty bad. the HV lead is used to measure secondary to coil core metal

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...