Questions & Answers for: baby lock cover stitch

Question about Evolve

2 Answers

cover stitch where you have to start on material. I had this problem. The trouble I was having was that in order to begin serging with the needle in the fabric was very awkward, there was bunching and

Ad

Question about Eclipse Serger

3 Answers

...Baby Lock serger, model#BLSE200(N) and I really haven't used it for a long time but when I uncovered it to use today...it seems like the feed dogs won't advance the fabric. I have it threaded ...

Ad

Question about Eclipse Serger

1 Answer

Babylock Serger loosing power My serger runs fast at first but after about 3' it starts slowing down. If I stop and let it sit a few minutes, it starts fast again then slows down. Is there a problem ...

Baby Lock bl 5280ED runs and gets slower and slower. Replaced motor and foot control and oiled throughly. The problem persists. I can see no visible cause for the motor laboring after running less ...

Question about Esante

1 Answer

...cover. Any suggestions? I did adjust a piece that I'm not sure if it is put back right or not. It is the metal piece that comes into the bobbin race from the left. It has two positions that are ...

My Babyloc serging machine does not feed the material through! The teeth appear not to move the fabric. I have taken off the plate to see if any fabric is underneath, but there is no dust or fluff. ...

baby lock bl4-736d won't stitch--It has not been used in about 6 years. It worked fine the last time it was used. I don't know where to oil or even if that is the problem. If your machine has ...

...Baby Lock Allageo Plus sewing machine. I am having problems with the clumping of the bobbin thread after a few stitches. I have removed and thoroughly cleaned the bobbin case. I have thoroughly ...

...Baby Lock Ellure ESL will not stitch. I have it threaded and everything, and I click to start and the motor just runs, the needle does nothing. I get an error that says the thread is caught and t he ...

...baby lock evolve serger for cover stitch. the blade will not lock 99% of all serger problems can be solved by going to the manual, unthreading, cleaning out all lint and 'stuck' threads, pieces of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...