Questions & Answers for: axle nut undo

...some times plastic gromits covering the nuts undo the nuts and lower the jack wala the axle is off.DO NOT FORGET TO UNDO THE BRAKE PIPES.the rest is simple.i have done this job by my self many

...axle nut, loosen the lug nuts, lift the car, remove the wheel, remove the axle nut, undo the tie rod end to free the steering knuckle, tap the axle out of the hub, then pry the other end of the axle ...

...axle nut incased in a type of clasp. When refitting axle bolt how much torque should be applyed? Can anyone help Take the clasp of and use an impact wrench po loosen.When replacing the nut use at ...

...axle loosen center wheel nut (look up utube)remove wheelsremove rod endremove strut boltsremove center wheel boltspress center shaft off or use a brass punch drop rotor assembly downpull shaft out ( ...

...nut on the axle undo ball joint remove axle from tire end then with a large pry bar pop the other end of axle out of transmission......place end of new axle in transmission and **** it in push hard ...

...axle nuts-the big nut on the axle at center of wheel-no, they are not self-tightening, just turned down real tight-about 150 ft.lbs. They are regular threaded, so to undo, turn them

...axle nut from a 2001 forester cannot remove axle nut from axle on car help????? Remove the centre from wheel but leave the wheel on the vehicle. With the vehicle on the ground,Put the vehicle in park ...

...hammer to make it's own flats then undo the socket which generally removes the nut. Only problem is that the nut will be no good when you get it off More information please Stub axle or rear

...canry transaxle Remove wheel undo the large nut from the hub ,and punch the axle in wards , jack car up and place on stands undo hub from the strut undo ball joint unbolt axle from gearbox ...

AWD. How can I remove rear axle? Undo the outer axle nut, then undo the strut (two bolts) and fold the upright outwards. You can then get the axle put of the hub, then out of the diff.