Questions & Answers for: axle no c clip

Axle C clip removal I am unable to remove the C clips that hold the axles in place in the rearend of a '94 chev suburban. Whats the seceret? sometimes you have to use a prybar to pull the shaft ...

...& don't have manual on it at this time, but will say very common that it does have "C" like clip at end of axle. Large pin comes out first, then push axle in slightly & remove clip, & slide axle

cant get rear axles out 76 chevy malibu figure 8 car wanting to weld the spider gears, trying to get axles out,but it doesnt seem to have "C" clips,my buddie looked at it and also said that he sees no

...cover and push the axle inward enough to access the retaining clip to remove it. It should slide out fairly easile once the axle is pushed in far enough to clear the retainer clip lock

...come out, even fall out maybe. remove the clip, then pull the axle out. be sure that the axle bearing surface is good, any pitting or grooves and the axle and bearing and seal will need

...axle out. The clip fits into a groove at the end of the axle. Inspect the axle bearing and seal while its apart ant replace them if anything looks like its worn, To install push the axle all the way ...

...clip; but the axle wont budge Fig. Fig. 1 Remove the side gear pinion shaft lockbolt and ... Fig. Fig. 2 ... the side gear pinion shaft Fig. Fig. 3 Push the axles in so that the C-clip groove is ...

...axle shaft inwards and the clip ( it really looks like a small horseshoe) will fall out, if it doesnt fall out, you will need to remove it, then the axle shaft will pull out. To install its the same ...

clip. Thes are suppose to be replaced each time you pull the axle but usually you don't have to unless they are bent or out of round. These circle clips are suppose to compress when you shove the axle

...shaft out -then either with help or yourself push the axle[at the flange] inward than remove "C" clip go back to axle and slid it out to take out other side same push in axle remove clip and slid ...