Questions & Answers for: avr message

...AVR 3805 The tuner has stopped working and instead we have the message: EXT. IN I guess we have inadvertently pressed the wrong button. Everything else seems OK eg DBS Any help would be much ...

...message on my Harman Cardon AVR 130. The reason for this error was - in a hurry I've plugged the optical input into optical OUT! Double check that your connections in the back are correct and ...

...which we connect in the arms and legs. In your case the leads in the arm have been interchanged. Thats why you get the message and prints inverted avR and avR. check the leads and properly place it. ...

...AVR off (the Power Indicator will turn amber). 2. Press and hold the front-panel Surround Modes button for at least 5 seconds until the RESET message appears on the front-panel Message Display. NOTE: ...

...message flashed is AVR 1700-USB (V03-05A) empty. Folder on usb includes file AVR170_USB(V03_06A).fw 3072KB. formatting wipes everything off the device usually, you may have deleted what was on there, ...

...AVR is connected to our TV. Now we get the "requires HDCP for playback" message and no streaming. What should I do? Personally I would use an RCA cable and hook up the AVR. ((RCA out of TV to AVR ...

AVR's frontpanel Message display, turn off the AVR and unplug it from the... signal. In normal operation, the current source name appears on the upper line, while the surround mode is displayed on the

...message display. 3. press the memory/folder button again to reset the AVr's processor. If the AVr does not function correctly after a processor reset, contact an authorized harman kardon service ...

...message and it won't let me change the band (either from the unit or the remote). Is this expected behaviour? Is it because I don't have the FM antenna connected? For some reason, do I need to have ...

WELDED hi, i have a APC SMART UPS SMT-3000 when i try to start have message on display "broken state: AVR RELAY WELDED" how can solve? https://jestineyong.com/video-apc-ups-repair-avr-relay-weld-fault