Questions & Answers for: avaya phone intercom working

...avaya phone to another, then the system is more then likely fried. from your system press the intercom button, 61. that should give you the paging access that I think you are looking for. For the ...

Avaya phone system (business) all stations ring in 12 locations througout business, rather than at secretary's desk. intercom no longer works after lightning strike. Is the time and date correct? If, ...

...avaya partner phone We had this problem before on only one of our system phones and a technician came in and cleared the problem with a function clearing series. Usually hit intercom button and than ...

...phone? and add speed dial? Click there | | V From extension 10 or 11 feature 00 left intercom left intercom #103 enter time feature 00 to exit programming Here is a link to a Partner ACS 4.0 ...

...If different phone works fine you have a bad phone. If problem still shows you have a bad port on a processor. Try available different port. You should really contact your Avaya vendor to fix

Avaya Partner ACS R7 phone system. It was fried due to a power outage. I assigned buttons on the phone to each individual extension in the office. I used to be able to hit an extension button and talk

Avaya Partner 18D phone in my office (ext 10). It has been plugged in for about 16 hours. But when I pick up the phone/speakerphone on this new set, there is no dial tone on any of the four lines. The

...phone from the extension 11. i press feature, 00, intercom twice and all it does is beep at me. wont accept any programming. Either you're not at ext 11 or you are pressing the RIGHT intercom ...

...the internet far and wide, but can't find a resource that details getting that function back on the phone. Any help would be appreciated. Try Googling (Avaya)(4424D+)(manual) without

avaya 18-d Can not use intercom to call another extension...when ext A calls ext B, ext B cannot hear ext A Is the Microphone on extension A working if you are using the speakerphone. If not try using