Questions & Answers for: av1 display

Ad

Question about FD Trinitron WEGA KD-32FS130 32" TV

1 Answer

...to the AV1 channel On Sky the AV1 symbol does not go out but stays on screen. How can I suppress this symbol (top left in green) from the screen? on original sony remote press the DISPLAY button ...

Ad

Question about BRAVIA KLV-S40A10 40 in. HD-Ready LCD Television

1 Answer

...my Sky+ remote the AV1 caption is always on the screen? I saw a guest solution on the site - but can't understand what has been written, it doesn't make any sense? press DISPLAY on the sony ...

Ad

Sanyo 68cm. AV1 is Black and White. AV2 and normal Tv is OK When I plug video a video cable into the AV1 port on the back of the tv it displays only in black and white. It doesn't matter weather its ...

...are plugged in. I can only think that I hit the wrong button on the remote somehow. Fixed it - the issue was that the TV would not display AV1 and I had to go through a number of steps to find

Question about Home Theater System System

1 Answer

(or vga/DVI/HDMI depending on graphic card)from your graphic card to AV1 in. same port as sound. Now select AV1 on HTS. If no picture on tv make sure you computer graphic card is set for dual display

Question about 42PX5D 42 in. Plasma HDTV

1 Answer

...I've mentioned above). If the AV1 or AV2, etc. input is not active (not switched on) then that input will only display a blank (black) picture in the top left corner of the screen. Hope this

...AV1 shows on vcr display you can do this by pressing button on remote marked with ( input / source or a picture with a arrow pointing into a tv you can only record the station that the digital box or ...

Question about Playstation 3 (PS3) Console

1 Answer

...located in av1 &/or av2 jacks respectively. ps3 powers up. no display appears on monitor. hold power button for two peeps--> will reset video to lower sittings-->restart; will show ...

Question about Playstation 3 (PS3) Console

1 Answer

...AV1 port. If I use Av2 port it display picture in black and white. Please suggest. I expect if you look at the menu you will find that AV2 is set up as S-Video or Component etc. etc. Set it up as ...

...all remote I have a one for all remote and need to know the code to remove the green av1 channel display in corner. thanks. Press the "Display" button on the remote control to get rid of

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Cindy Wells

Level 3 Expert

5909 Answers

Marvin
Marvin

Level 3 Expert

85020 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...