...Audiovox AVT-1498 that has no color. The picture is perfect but only in black and white. All the menus and when I do an "autoprogram" the entire screen is in color. A few days ago the picture was in ...
Question about VE920 9" ULTRA-SLIM DROP-DOWN LCD TV WITH DVD&SPEAKERPHONE Television
change the video input can't change video input button The button may be defective or you may need to use the remote to select the input source. ie vidio line in or vidio 1
Question about VOH1502 15 in. Car Monitor
...Audiovox monitor and run the RCA sound cables(?) to the new in-dash DVD player amplifier. Does this make sense? actually there would have been some short circuit in the connections... that would have ...
My flipdown DVD player in the car is having tracking trouble-get a series of horizontal lines that jump around screen, happens on both DVD and vhannel tuner. Thanks it sounds like you reception is ...
Audiovox LCD FPE3206 problems Tv was working earlier today. Turned off, came back from town. Turned on, power light turns to blue. But that's it. Can't get the input, menu, anything to come on to ...
input. Check where the cable connects to the back of the TV, that is likely to have a label. Change the input on the TV to match what the label says. Make sure device connected to TV is also turned on
...Audiovox" doesn't narrow this down much. Turn the volume control to something medium. The errant switch, control or condition may change and you will suddenly release the amp's full power and ...
Question about FPE3205 32 in. HD-Ready LCD Television
...Audiovox FPE3205 that the picture doesn't hold the clarity and gets blurry and grainy. Support said that it needed to be reset, but I've done that and still the same issue I do not ...
tv changes input from hdmi 1 to hdmi 2 without touching remote. open the r.control and clean the keypads from dirty, oxide, corrosion, with contacts cleaner or alcohol isopropyl.tight the springs ...
Question about New Original FPE2607 Remote Control
Have Audiovox PLV16081W 8" tv. I was dusting the top where all the contol buttons are. Suddenly went to "no signal". Now cant get it to go back to picture. change input or source
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions