Questions & Answers for: attach gas tube tank

Question about 2001 Impreza

1 Answer

gas the pumps keep clicking ogff after about every $1.00 or so There is a vent hose (rubber) attached to the fill tube, it's much smaller than the fill tube, and it lets the air out as u fill tank. If

Ad

Question about 1995 Maxima

1 Answer

...attach it to the car body. The top part, by the gas lid, comes off easily, it's just a plastic dam. You have to carefully work it off the (other end) at the rubber hose connector. Once it's out, get ...

Ad

tube. Should be noticeable as soon as you remove the gas cap. If there is just an open hole, the flap may have come off and is causing a blockage in the tube leading to the tank. I'll try to get a pic

...at the top of the filler neck where it attaches under the gas door and then loosen the clamp that holds the filler tube to the tank,and then reverse the instructions to install the new filler

Question about Pro 14" Gas Chainsaw 33CC P3314

1 Answer

...gas tank, the fuel filter fell out. The fuel line had rotted. I contacted Poulan, and they sent a new filter and line. Their instructions were inadequate. First, it is difficult to tell where to ...

Question about 2007 Lucerne CXS Sedan

1 Answer

...gas pump shuts off like the tank is slow. the fuel return hose is kinked or plugged up. every filler neck has a secondary vent tube attached to the tank for fast fill ups. If it is slow in filling ...

Question about 2007 Lucerne CXS Sedan

1 Answer

gas I had to stop and start and it took 15 min for 4 gallons. IF there is a blockage or an air pocket how do we fix it???? Check the filling tube (or hose) going to fuel tank for damage. Could be the

Question about 11A54MC006 21Inch 139cc MTD OHV Gas Powered Side Discharge

2 Answers

...gas tank. Remove the governor return spring. A plastic tube will be attached to carburetor that goes into the top of gas tank pull on it and it will come off carburetor. It should have a small o - ...

Question about 11A54MC006 21Inch 139cc MTD OHV Gas Powered Side Discharge

1 Answer

...gas tank where it attaches to tube running to carborator. Have replaced the clamp tightening the tube connection. Hi Charlotte: You'll need to determine the exact source of the leak: - Failed hose? ...

...gas tank when saw is on it side. There is nothing attached to the vent. The vent hose attaches to the white nipple coming out of the tank. This hose is about 2 inches long or so and contains two ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...