Questions & Answers for: astro van distributor

Question about 1999 Astro

1 Answer

...astro van 99 will start sometimes and sometimes it won't. changed igition coil but did not help you might have water dripping on your distributor. Need to place palstice over ac line so the water ...

Ad

...astro chey van 4.3 engines need to set the timing don't mark the points. The distributor in that engine can only be installed in one position. The hold down is built onto the distributor meaning when ...

Ad

...astro van? Distributor cap? You have to remove the interior dog box and the distributor and coil assemblies are in the back of the engine behind the upper plenum. Ok, it either has a coil pack or a ...

...astro van v6 THE FIRING ORDER IS AS FOLLOWS : 1-6-5-4-3-2. CYLINDER NUMBERS (front-to-rear) : LEFT (driver side) 1-3-5 RIGHT (passenger side) 2-4-6 To set ignition timing, ensure that engine is at ...

...astro van v-6 engine diagram on engine block firing order and diagram firing order on distributor Here is the firing order diagram for that engine and vehicle. Have you tried running a search on the ...

Question about 1992 Astro Extended

1 Answer

...Astro Van starts but shuts off. I service it, plugs, distributor cap, wires etc. When I start it it back fires, and cuts off. Lester R. Thurston Nassau, Bahamas Did it backfire beofre you did the ...

Question about 1996 Astro

1 Answer

...Astro Van--"Will not 1996 Chevy Astro Van--"Will not start", *Replaced ignition moduel, *coil, *crank shaft sensor, also the *distributor with a new *Cam sensor. Checked the #1 plug ...

...astro van is turning over but won't start,i installed a new coil and anew distributor but there is no spark at the coil to the distributor i installed a new coil and also a new distributor,but ...

98 chevy astro van, i remove the distributor shaft and forgot to marke it and now it wont start, how can i fix this problem? number one plug has to be at TDC before you put distributor back in

Question about 1998 Astro Van

2 Answers

...astro van start? i have replaced all plugs, wires, distributor, distributor cap, rotor cap, cam, timing gears, timing chain, and set the distributor pointing at the printed 6 on the base of the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...