...jackshaft to the starter, mark which way it comes out. Tapered end towards starter. Remove the exhaust system if needed. Remove all bolts holding the oil tank and lift it up as high as possible. ...
starter jackshaft on. See if you can work the jackshaft out, some of them you can get out others you can't. If you can't get the jackshaft out, you'll have to remove the snap ring in the center of the
starter back when i try pull it out Evidently, you're working on a Big Twin of some fashion. What you are feeling is jackshaft. You need to drain the primary and remove the outer primary cover. Remove
starter jackshaft. You don't necessarily have to remove the starter gear and the jackshaft but you may be able to work it out without moving the clutch assembly out. If you want to move the clutch
starter jackshaft. You don't necessarily have to remove the starter gear and the jackshaft but you may be able to work it out without moving the clutch assembly out. If you want to move the clutch
Question about 2000 FLSTC Heritage Softail Classic
...jackshaft bolt into the starter shaft and while holding the pinion gear in position tighten the bolt to 84-108 in-lbs (9.5-12.2 Nm) and bend the locking tab against bolt head. THEN reinstall the ...
Question about 2000 FLSTC Heritage Softail Classic
...keyway screw the jackshaft bolt into the starter shaft and while holding the pinion gear in position tighten the bolt to 84-108 in-lbs (9.5-12.2 Nm) and bend the locking tab against bolt
Question about 2000 FLSTC Heritage Softail Classic
...keyway screw the jackshaft bolt into the starter shaft and while holding the pinion gear in position tighten the bolt to 84-108 in-lbs (9.5-12.2 Nm) and bend the locking tab against bolt
...are you calling the starter jackshaft assembly the starter clutch and meaning that instead.. If you are not referring to the jackshaft please post again describing exactly what you want to know
...starter jackshaft assembly at the end of the starter. Remove the pinion gear and spring from the jackshaft. Remove the jackshaft assembly and the coupling from the inner housing. Remove the starter ...
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions