drive shaft and gear, should it move back and forth if you pull and push on it. If I grab hold of the bobbin case and hook assembly and pull hard it will come out a little bit and then if I push on it
...you turn the handwheel? If no, then your hook drive gears are shot. Make sure that the hook piece at the top of the bobbin holder fits into the slot at the top (12:00) as this aligns the needle
bobbin winder to the underside of the cover. Note that the winder assembly mounts are slotted, so when reassembling, the winder must be adjusted to engage with the drive wheel. (Note its old position.
...bobbin rewinder runs off the drive belt, how do you rewind the bobbin without the needle moving? Is there a button or a switch that basically puts the machine in neutral? Hi Diane...you can wind ...
...bobbin thread Bent needle, needle inserted wrong can cause problems. On that particular model of brother it uses a plastic rack, or drive assembly to move the sewing hook back and forth. They have a ...
bobbin case drive gear is jammed with something ?? but I cannot get into the area without taking a large plate away from under the machine. Is this o.k., ?? Yes, that is fine. Only while you are ...
Question about D'cor Excel Pro 5124 Mechanical Sewing Machine
...bobbin race assembly on my singer touch and sew 640 will not move? This specific model, and most of the Singer Touch and Sew series of machines has several plastic gears that drive either or both the ...
...bobbin winder drive rubber gone gooey? Is there anything caught up there? Hopefully you may find what is causing the stiffness. It is not really likely that one of the shaft bearings is tight but you ...
Question about CS-80
drive the hook assembly. Many machines have plastic gears and can be broken or will dry out and break due to age. Yes, the gears can be replaced. 2. The bobbin driver assembly does not suppose to spin
Question about CS-80
...bobbin assembly to stop working It doesn't move anymore broken drive belt for that shaft If it is a mechanical machine, it probably needs a good cleaning and oiling. Consult your owner's manual for ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions