...contacts the armature? the other brush is slightly rounded from contact with armature and appears that the entire brush makes contact. never looked at these when they were not any problems!!!! any ...
Question about Milwaukee 6514 20 18V Sawzall, the Hatchet
...the armature should be fine. check the condition of the battery also. and while checking check from the switch/battery contacts to the brush leads for an open. Let me know if you need more
Question about Milwaukee 6514 20 18V Sawzall, the Hatchet
electric motor makes loud grinding sounds and vibrates badly It could be your armature bearings need to be cleaned and repacked with grease or heat has caused the windings of the armature (shaft with ...
Question about Cast Iron Coil Tattoo Machine Liner & Shader
...to ajust the points on a tattoo gun be more specific, you mean contact points? that's all about armature height, spring tension, spring load, spring angle, spring slope... you want your armature ...
Question about Cast Iron Coil Tattoo Machine Liner & Shader
I replaced armature, bearings and brushes. The brush/armature contact seems to have excessive blue sparking. What now? replace or recondition the worn armature in your motor that the buushes rub on
...are worn down or the springs are collapsed and the brushes are not making good contact with the armature. b) The armature contact (commutator) is damaged or there is a short in the armature ...
Question about 18V LXT 7/8in. Rotary Hammer - Tool Only, Model BHR202Z
...contacts to know what can be wrong else is remove the brushes charge you battery and measure it first if its full and take a multimeter measure tool between both brushholder measure and pull the ...
Question about 18V LXT 7/8in. Rotary Hammer - Tool Only, Model BHR202Z
Fein Multi too FMM350Q. took it apart,checking for null on stator unit, and across the armature unit. What are the best contact points to assess if windings are good? On the armature I am checking ...
Question about 18V LXT 7/8in. Rotary Hammer - Tool Only, Model BHR202Z
good. If all batteries are good, check the carbon brushes if they still able to make contact to the armature of the motor. If the carbon brushes cannot make contact or all worn-out, replace the carbon
Question about 18V LXT 7/8in. Rotary Hammer - Tool Only, Model BHR202Z
...brushes contact the armature SHINY. If the armature rotor contacts are shiny and it still sparks, make sure that all of the windings measure the same. Excessive sparking is a sign the armature is ...
Usually answered in minutes!
386 Questions
103 Questions
81 Questions
63 Questions