Questions & Answers for: aquabot repair

Question about Turbo T2 In - Ground Pool Cleaner

3 Answers

...Aquabot Parts and Repair The t2 has 2 sets of drive belts and 2 motors...could be the belts, could be the motor my aquabot pool cleaner seems to run just fine, but no real suction, any have any ...

Ad

having problems with my dolphin diagnostic explorer robotic pool when i put the unit in the pool it shuts off within 30 seconds, what should i do? Your motor unit was covered for up to 3 year under ...

Ad

Question about Pool Inc Dolphin Diagnostic Automatic Pool Cleaner Ne250

3 Answers

...aquabot-automatic-pool-cleaner.com/Maytronics-Dolphin-Repair.html Then make sure no moisture accumulated in the circuits. Mine got the same problem.. after running trouble free for several years it ...

Question about Turbo T2 In - Ground Pool Cleaner

3 Answers

repair was tedious for a non-mechanical guy like me but I did it. Often it is the belts that need to be replaced. Next the rubber tracts. It's worth repairing. And worth repairing yourself if you can.

Question about Turbo T

1 Answer

...Aquabot. The pump motor is separate from the drive motor, and the drive motor acts to drive the wheel tubes by means of a belt drive system. If the drive motor is working ( lookiing at the unit under ...

Question about Turbo T2 In - Ground Pool Cleaner

1 Answer

My T2 stutters when is operates. Every 6-8 inches My T2 stutters when is operates. Every 6-8 inches it pauses and then proceeds. When I first purchesed it it operated smoothly. I also had the belts ...

Question about Turbo Remote Control In Ground Pool Cleaner

2 Answers

...in the drive system is worn, allowing the belts to skip. There is a good guide at http://www.aquabots.com/repair-instructions/drive-belt-replacement.htm and it could just be the belts. Also, ...

Question about Pool Inc Dolphin Diagnostic Automatic Pool Cleaner Ne250

1 Answer

Aquabot Dolphin pool cleaner... stalls in pool ..have to shut off electriicity for a few minutes and it will start again...does this many times during cleaning cycle. Thank you for posting your ...

Question about In - Ground Robotic Pool Cleaner

1 Answer

Unit will not move it just blows fuses propeller moves by hand only the logic controller of the robot needs replacement or component replacement. Circuits to the electronic controller board has failed

My Aquabot starts working then stops, out of the pool if I manually move the belts it starts again. Any suggestions? Is there someone in the Albany NY area who repairs these? My Aquabot starts working

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13524 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...