Questions & Answers for: aquabot pump water

Question about Turbo T

1 Answer

...water log again, which may takes as few as 10 minutes in the pool. 2. Stop using all those words *********** didn't teach you and probably didn't even know...This is a common problem. ...

Ad

Question about Turbo T2 In - Ground Pool Cleaner

3 Answers

Aquabot is pushing out water but will not move to clean the pool i need to know if i can get a manual for the Aquabot T2? I also can not get the bot to move in the pool. It is spouting water out the ...

Ad

Question about In - Ground Robotic Pool Cleaner

2 Answers

...aquabot-automatic-pool-cleaner.com/ Shelby Christian [email protected] Check the handle for water inside, common problem. Make sure no air is in the system. Remove all floats if installed inside the ...

...pump motor and the insides are water logged. Guess its time for a new one. Is wiring tough on these?? You can't do it yourself. The winding of pump motor has burnt up. You need to rewind from the ...

Question about Turbo In Ground Pool Cleaner

1 Answer

Aquabot T4 RC, Pump runs for 1 second then shuts off for 4 seconds, then repeats its self. Mine does this too some times. I find that if i manually force the wheels (out of water) to turn slightly and

Question about Turbo T

2 Answers

Aquabot Turbo T2 flips over when it tries to climb walls. Water is not coming out the top but the unit is moving fine. Does it need a new pump motor or can something just be clogged inside?? the ...

Question about In - Ground Robotic Pool Cleaner

1 Answer

...performance simply remove the Filter Bag and operate the cleaner without it. If the Aquabot then pumps water strongly, and climbs the walls properly, the Bag most likely requires a thorough ...

Question about Turbo T2 In - Ground Pool Cleaner

0 Answer

troubleshoot aquabot turbo won't pump water moves slow bad pump motor possible bad drive motor also

Question about In - Ground Robotic Pool Cleaner

1 Answer

Aquabot wont pump water or move, worked yesterday sounds like a circuit board failure

Question about Turbo Robotic Pool Cleaner

1 Answer

...aquabot turbo will not move or pump water? My unit will not move or pump water. The fuse is good. When I turn the unit on and push the reset, there is a humming. Probably the drive belt came off the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

David Spradling
David Spradling

Level 3 Expert

13520 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...