electrolux canister vacuum My daughter dropped the canister vacuum and it came completely apart. I have everything back together except the electrical wiring. Can anyone tell me where I can find a ...
...5500 The cord on my vacuum cleaner won't retrack. What is the trick to get the back end off the vacuum cleaner? It looks like it was pulled out too far. Depends on which model you have, but most of ...
...on position. The vacuum is 15 years old and I recently replaced the hose/handle part. Can I take apart the handle portion to see if anything's obvious there? It probably wouldn't help, it sounds ...
...model, on each side, there is a bar in the middle that will slide off, then the 2 halfs will come apart. They will only slide in one direction. If an older model, there are screw on the top to ...
...I have an Electrolux epic 6500SR I'm trying to change the power cord can't seem to find how to take apart the cannister where the cord is located Can anyone please give me step step directions? You ...
...Be aware that shops will usually charge more to reassemble a vacuum if they didn't take it apart or repair
...the curve before it enters the hose. The handle needs to be removed to do this. Taking the handle apart and especially putting it back together can be tricky, so I recommend taking it in to an ...
...Lux 9000 cannister electrical cord retraction? It was pulled out as far as it would go and now it doesn't retract. First, try standing vacuum on it's back end. Gently pull on cord and release. Try ...
Lux 5000 Why do you need to get to the cord assembly? If the cord will not retract, tilt the vacuum to about a 45 degree angle and gently tug and release cord. It will usually retract. Due to problems
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions
