Questions & Answers for: how to take apart a faucet

faucet? its the mixing slide in there its stuck u can take it apart at the handle it pulls out shake it if it doesnt move its bad. what happens is over time sediment gets in there and seazes it up. if

...apart the faucet to replace the seal to fix a drip. Thanks very much. Turn the water off at the faucet, remove the handle and the retaining nut that is apart of the trim. You will see where you can ...

...diagram that shows how tom take the faucet apart and repair the leaks and losen the spout? Try removing cap of knob and tighten screw it could be loose. If that is not it it may need a new seal

...apart the lever and When using the faucet, water oozes out between the trim caps and the main stem of the faucet. We cannot figure out how to start taking apart the lever and stem on jado 825/850 new ...

...apart i have a moen 87135c kitchen faucet (or similar) that is leaking - looking to change the cartride, the O rings, just tighten or all - but I can't figure other way to get it apart - I don't see ...

...faucet, 15 years old, two handle control, 8" apart. I have to install a new plastic insert { moen P# 97479} Is there a way to do this without removing the entire Faucet. Thanks, Ken There should be. ...

faucet is leaking from the pulldown where the hose is conected to the spout ive tried to take it apart is there a special way to take it apart before you take it apart ,I want you to check,the pullout

...faucet apart to see if there was trash impeding the flow and found nothing. We put the faucet back together and the flow is unchanged and it's leaking Can you help? Take it back apart and check the ...

...faucet apart make sure hot is getting 2 & coming out faucet ***. did you turn off stop integral w/ faucet or outgoing shut off valve on water heater.. May have rust or lime in small orifice ...

...faucet apart to replace the diverter? How do I get body of faucet apart to replace diverter please? A suggestion here, in fact 2 :>D ...