...antenna jack on the box. Do I need to buy another cable to hook to the other antenna adaptor that goes to rf cable on the box? Sorry...I'm not good with electronics, cables, etc. Thank you! Robin The ...
...for the antenna? Is it same as earphone jack? There is a small round rubber plug on the back of the phone above the battery, below and to the left of the camera lens that I believe is an antenna
...antenna jack How can I repair the antenna jack on my Symphonic LCD 32"? The antenna jack repair will depend on the type of parts required and the accessibility to the jack. Usually the jack is in ...
Question about BC350C Base Scanner
...Antenna jacks came come in several types , one is called a BNC which just pushes in and turn about half a turn to lock in place,also some scanners have the type of jack like the back of a car radio, ...
Question about ICF-SW77 AM/FM/SW Radio
...NOT MAKE PARTS ANY LONGER The antenna jack is no longer available, these can be serviced but the unit needs to be sent out. I do this service, contact me .... ...
Question about TV-980 2.3 in. Handheld Television
...antenna jack on the TV, and the other end connects to the coaxial cable that goes to the TV (RF out) jack on the converter box. If you still have one of those old antennas, you may be able to still ...
...antenna cable out of the dash area to the hinge area. 8. Jack up the front right of the vehicle. Support with Jack Stands. Do not use only the Jack! Use the jack as a back-up in case of Jack Stand ...
Question about BC248CLT Base Scanner
...antenna jack. The AM antenna jack is for the reception of AM radio station signals. The scanner antenna jack is for police/fire etc, as well as FM signals. In case you don't have a manual for your ...
Question about NX-503 Television
(75/300 ohm) jack (11) antenna pad? I have a naxa nx-503 portable 5.5inch t.v. and I need a jack (11) antenna pad to connect to a small portable antenna. 300 ohm feeder connection (75/300 ohm) On ebay
...antenna jack should still work, because the preamp is only for the whip antenna's SW reception. An easier solution would be to just run a wire from the antenna jack to the whip antenna, but you would ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions