Questions & Answers for: anodes rear projection tv high

Ad

Question about VS-50501 50" Rear Projection Television

1 Answer

projection tv and when i turn it on, one of the anodes or something in the back is fried and sending charges which are sparking out of this piece on the motherboard. Didn;t know if I could cut of that

Ad

Question about PS61670 61" Rear Projection Television

2 Answers

...tv set came in with usual high voltage snapping at anode replaced anode cap and wire and silicone set then fired up ok but with poor luminance , looks like problem where raster is similar to turning ...

Ad

Question about 43FDX15B 43" Rear Projection Television

1 Answer

...rear projection tv and it is only 18 mths old and has been fixed once already and it took 2 mths! My problem is after about 2 hrs of watching tv it makes a pop noise goes blank and then comes right ...

Question about 55H70 55" Rear Projection Television

1 Answer

...on the TV it made loud crackling, poping noises and the power red light was just flashing. The sound is fine just no picture. sounds like high voltage arcing,/flyback,focus block,h.v. anode lead

Question about VS-60609 60" Rear Projection Television

1 Answer

...TV technician take care of this problem. As a suggestion have him check the HV on the CRT anodes and the voltage doubler which the IHVT goes into. In any event get the set checked and repaired by a ...

Question about GB4308 43" Rear Projection EDTV-Ready Television

1 Answer

...wire but not what it looked like or where it was help much appreciated. the anode wire is a heavy red wire in a projection tv there will be three be careful the anode wire carries the high

Question about 43A10 43" Rear Projection Television

1 Answer

...anodes of your Red Green and Blue CRTs to see if there is HV present. Then you will have to measure the voltage off of the IHVT (Integrated High Voltage Transformer) to see if it is delivering the ...

Question about P52926 52" Rear Projection Television

1 Answer

...THE VOLTAGE TO GO TO THE 3 PICTURE TUBES KEEP IN MIND ,,IF YOU HEAR A POP--IT'S USUALLY A HIGH VOLTAGE ARCING TO SOME METAL--YOU ARE BETTER NOT PLAYING THE TV THESE JOBS ARE BEST DONE BY TECH'S ...

Question about AV-56WP74 56" Rear Projection HDTV-Ready Television

1 Answer

...with the button. the blue light continously flashes. if the noise is from inside the tv in the back,the high voltage transformer that feeds the anode for the rgb tubes,28000volts probably is

Question about D52W19 52" Rear Projection Television

2 Answers

...TV Sound Works But No Picture And There Is A Snapping Sound And Light Or Ark Flashing Happening Inside May be the high voltage lead(s) have popped off of one of the pix tubes...the flyback(HV) ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76125 Answers

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6004 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...