...module to break. The part # is 627986 and will need alumlastic to put between thermostat and mold. Alumilastic part # is 542369. You can get this at http://www3.sears.com/. You can also use silicone ...
Question about 25.6 cu. ft. Side-by-Side Refrigerator with In-Door-Ice Dispensing System
...opposite side is the thermostat. Pry it out and place the new one in. You'll need some stuff called alumilastic. (Part#4317852) Put a dap on the new thermostat and put it all back together. After It ...
Question about 21.0 cu. ft. Top Freezer Refrigerator with IceMagic Plus Ice Maker
my ice cubes appear to be hollow. what is causing this? The water valve is not letting enough water in . Replace the water valve . The following is a copy off of the Amanda schematics for icemakers. I
Question about (MFI2568AEW) Bottom Freezer French Door Refrigerator
...MFI2568AEW and on page 10 you will see part=> 627985 Pin Style Icemaker Thermostat Adhesive - Alumilastic (Cement) That is just silicone rubber you can also get locally. If you have any other ...
Question about (MFI2568AEW) Bottom Freezer French Door Refrigerator
...element has failed. Whirlpool indicated that you need FOOD GRADE SILICONE GREASE,(part 542638) and ALUMILASTIC ADHESIVE (part 4317943) to attach the BIMETAL THERMOSTAT to the FRONT OF THE ICE CUBE ...
Usually answered in minutes!
3,171 Questions
1,894 Questions
1,239 Questions
1,098 Questions
927 Questions
