Questions & Answers for: allis chalmers wd

Spindle on 6060 keeps breaking are the front ends Spindle on 6060 Allis Chalmer keeps breaking are the front ends weak? Yes unfortunately they are. I have personally taken them apart and welded and ...

my WD seems to flood when it is being driven, otherwise it idles fine. I can drive it about 200 yards and then it floods out. I have to drain the carburetor before it will start again. it has an ...

Recently had starter rebuilt. trying to get tractor to start. only used a few times when trying to start engine. Didn't overheat starter. Today, it turned over engine well in 2 attempts. On the 3rd ...

how do i remove the starter on my allison chalmers wd tractor Isn't there just a tapered bolt that tightens into the bell housing & down into the starter housing, if I recall correctly.

where can I find year of WD allis chalmers tractor and serial # on the The serial no. is on left differental housing

Howdo you adjust the hand clutchon a 1953?? wd45 I've checked the dry clutch and Pressure plate and all seems well. Remove battery and tray. Remove cover, use a .065 feeler gauge between 2 disc's

...allis chalmers 1950 wd,can the points short out on the distributer yes the short can be from the insulator in the pivot point allowing that point to touch the fixed point base other problems are that ...