Questions & Answers for: align needle

Ad

...needle bounces back and forth too badly to get an accurate measurement. Bought used, clean on outside, everything else seems to work correctly, original mic. Don't worry about the meter in the radio. ...

Ad

Question about CS6000i Computerized Sewing Machine

1 Answer

...hold where it should go through and hits metal one the throat plate. I fixed the sewing problem, it was a belt. if a new needle still wont align with the needle plate, your needle bar is out of ...

Ad

Question about 14SH654

1 Answer

...align it. I am trying to help out my 89 year old mother in law. make sure the needle is positioned correctly and all the way up into the deedle slot. lower by hand and check again, if still doing so ...

Question about Huskylock Computerized 910

2 Answers

align the sewing head since there is no sewing head alignment in a 900 series Huskylock ( or any Huskylock that I know of). The upper adjustments are needle bar height and needle bar twist. As long as

Question about Deluxe 7100 Mechanical Sewing Machine

1 Answer

...needle in place. Remove the old/broken needle, paying close attention to the needle's alignment (which direction is the flat side of the shaft facing) Insert the new needle with the

Question about CS6000i Computerized Sewing Machine

1 Answer

Needle not aligned with hole in presser foot I just received my machine yesterday (ordered from Amazon). The presser foot was loose in the box when I opened it. I reattached, but the whole needle ...

needle do not align up together. I have tried for over one hour while looking at video tutorials and reading the manual. My husband also tried. We both believe the threader and needle eye to not align

...doing free motion quilting. Changed needle, rethreaded machine and bobbin. ck your bobbin plate alignment if it got bent while free handing and needle came down and bent/broke then theres a good ...

Question about CS6000i Computerized Sewing Machine

0 Answer

The needle keep on breaking because it stich on the plate Your needle alignment may need to be adjusted. Sometimes this happens if you pull the material rather than let the machine feed it. I took my ...

Question about CS6000i Computerized Sewing Machine

1 Answer

...up the bottom thread but stitch is not formed. I have a Ming Hui sewing machine. The hook- needle alignment was off and so I aligned it. Now the hook is going through the loop and top thread is ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Brad Brown

Level 3 Expert

18060 Answers

Mike Charette

Level 3 Expert

1847 Answers

Are you a Radio Communications Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...