Questions & Answers for: alcohol detector

Moisture detector Won't accept tape. Moisture detect flashing clean the dew sensor with q-tip and alcohol.

...detector faulty or is the boiler not burning cleanly and depositing ''soot'' on the flame detector? next time it turns off let it cool and clean with a cotton swab with rubbing alcohol after

...detector into thinking the batteries are weak. Simply turn the batteries around so the fat connector of the battery touches the skinny connector of the device. Mine was, fat side on the right. I ...

...detector is dirty, clean cartridge contacts in printer with a Cotton tip and some good cleaning solution (if alcohol, avoid camphor scented alcohol; use ETHYL ALCOHOL, Etanol or

of air and thoroughly spray in and around the smoke. You can also remove the cover and use q tip in alcohol to clean it well. If that does not correct the problem, replace the last one

natural light image is fuzzy cleaning elastomeric and lcd connectors may help with isopropyl alcohol and cotton buds

...Heptane 500 PPM Ethyl Acetate 200 PPM Isopropyl Alcohol 200 PPM Carbon Dioxide 1000 PPM The lysol spray probably uses carbon dioxide as a propellant...this sets off the co detector also... ...

alcohol still will not crank . Does it have an alcohol detector fitted? Is the alcohol detector stopping the car from starting. Its meant to do that unless you prove you have no alcohol on your breath

...radar detector fell in a ****-tobacco cup. Is it able to be cleaned up on the inside and get working again? Not likely. If you try, clean its circuti board with denatured alcohol and low pressure

...paper. You will probably need a flashlight to see the eye. When it gets covered with dust it thinks paper is there all the time. Dip a cotton swap and some rubbing alcohol and clean the detector