Questions & Answers for: air compressor doesnt fill

...air compressor -- intially fills tank o.k - but when air pressure drops from uasage -- won't recycle -- trips circuit -- i replaced 15amp circuit with 20 amp ( wiring supports a 20amp ) nothing else ...

Air-Pac 1.5 HP compressor but only one tank fill I haven't used the compressor for about 6 months and just started it up and the lower tank fills (pressure gauge on that tank increases as normal), but

...compressor no air leaking???? strip the cyclinder off and inspect the valves if closing and opening also check to make sure you dont have a blown head gasket also on the tank from the pipe from the ...

...air compressor, model# 919.155612. when I fill it up it works fine, but when the compressor kicks back on after i used it, it sounds like it doesnt want to work it runs real sluggish and it will keep ...

...compressor, the regulator gauge and the tank pressure gauge isn't moving, doesnt seem that the tank is filling with air..it was just working an hour ago sounds like you blew out your valve(s) you ...

...line, it still blows hot air..can someone help...the compressor is turning, also the digital temp readout doesnt show but i pressed the temp all the way down and the a/c on..and i still get hot

...air but its not cold and the clutch connected to the belt does not spin what do i have to do to get my A/C to work? It sounds like you may need to change out the AC Compressor. Once done, you will ...

...air if the compressor comes on and fans work when the ac is on ur compressor and fans work , if u fill the a.c and it fails to hold pressure you obvosuly have a leak look around to see if the ...

...turned on it doesnt blow cold air first check if the compressor engages if not could be fuse, broken wire, or just low on freeon you will need to send it to a ac shop to empty and fill, test for ...

...compressor doesnt fill up it only goes to 60 psi It only goes to 60psi it doesn't turn off Make sure that you have the right oil in it, you can damage the compressor if you are using standard motor ...