...error starts again. Is this a mechanical problem, the hookup, or the water pressure? Thanks. May 15, 2009 Hello, I had this exact same problem with my Frigidaire washer (E70) as bubbles100. I called ...
...code Fault condition Check E11 Fill time to long. Refer to test (1). E13 Water leak in tub or air leak in air bell. Refer to test (2). E21 Water not pumping out fast enough. Refer to test (3). E23 ...
AFFINITY WASHER ERROR CODE WASHER WILL FILL AND START TO WASH AND ERROR MESSAGE E70 COMES UP Peace Friend, ngafm At your service! With an error code the only way to find and to repair this is, First ...
Error Code E70 Have way through the washing, the machine stops displaying E70. Usually it happens when we change the settings for example setting "extended rinse" and so water fill problem ,,,check ...
...error is that the hoses would have swapped (hot to cold, cold to hot). It means the washer isn't getting cold water.Try to switch between the hoses. Another possibility is the faucets are not turned ...
Question about Affinity ATF7000E Front Load Washer
washes starts buzzing and blinking and says e70 The e70 error code comes on when the hot and cold water hoses are reversed or not properly installed.
Question about Affinity ATF6000F Front Load Washer
affinity washer. What does this mean? My husband and I moved out Affinity washer yesterday. Today was laundry day. I got 3 loads done, but now I'm receiving and error display "ER70".
error code E70 Hi Elizabeth, typically this particular error code indicates that the water temperatures are wrong. Often this is caused due to the hoses being wrongly connected to the valves. Check ...
...error code E70 indicates that the hoses on your washer may possibly be reversed. This causes your washer to think the water temperatures are incorrect. I recommend checking the hoses and make sure ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions