Questions & Answers for: aeg washing machine lights

AEG L1250 Washing Machine I used the washer last night, this morning there are no lights on the front panel,(just as if the plug was pulled) however, I have removed the lid and there is power to the ...

aeg 76669 oko lavamat machine not starting all six lights [pre wash, main wash, rinse, rinse , spin, and end] flashing machine three years old just successfully completed wash cycle, loaded up for ...

aeg 76669 washing machine does anyone know how to reboot an AEG 76669 washing machine, it is not curently working ad all the lights are flashing please help!! The only way to reset a washing machine ...

...AEG lavamat 6955 sensorlogic washing m/c, was showing F2, cleaned out pump,spin cycle continued OK but now F3+1000+900+spin lights flashing. Any ideas?'' Waited half hour; on start up F3 had ...

...washing machine AEG lavamat 86800 (1998) blinks C9 and says no centrifuging and pre-wash. Thank you J. 1) Hold in the Pre-wash & soaking buttons TOGETHER; 2) At the same time, turn the knob ...

...AEG washing machines (update) C3 indicates float switch fault' unquote. Sorry- looks like a service call is required ;-0( If this has assisted and/or clarified the situation for you please ...

...flashing on a Aeg washing machine When the cycle begins , then slows down and stops , beeps, E50 flashing light Your Water inlet valve is bad or has failed! You need replace either Hot or cold

I have an AEG lavamat 50265 washing machine. it starts entering water then pump the water out and end light blinks 6 times Check the heating element if it has burned out. If it has, change it.

aeg lavamat w1450 will not light up..... power is on the machine will not light up nor will the door lock. many times it turns out to be the door switch has failed .

When I start my aeg washing machine it start an in a seconds it stops and start and light keeps flushing possible bad belt or transmission