Questions & Answers for: advance lever loose

...advance lever cover as suggested and tightened the screw. This did not solve the issue. However, I then realized the film rewind button on the bottom of the camera was stuck on the "in" position. I ...

advance lever on my ricoh kr-5 broke the film advance lever physically broke. the plastic on the top broke. the arm is loose and hangs down a bit, but is still attached. it will advance often, but not

...advance lever will not advance. Meter will not give reading. Fresh batteries installed. Meter only flashes "+F32" when turning the aperture dial on lens. Camera works fine on M and bulb settings. the ...

advance lever goes back and forth putting no tension or movement inside the camera to advance the film. Was working fine, then after taking my last shot, lever is just sort of loose., couldnt load new

...advance lever loose. Not used camera for a few years and set to M250 mode due to not having batteries, Advanced lever once to test, advanced one, then pulled lever back for another test. Lever then ...

...advance lever lock in place when the lever is returned ? if not, the lock spring broke. This is a common weak point in the ME Super. the camera must be partially disassembled to be repaired. get a ...

...advance lever is loose, shutter button wont click. I was taking pictures, and the lever seemed a little harder to push, but not that much of a difference, then all of a sudden, it got loose, and the ...

...advance lever, shutter release button and the self-timer. (Phenix DC303N - loose advance lever, and Vivitar V3800N - jammed advance lever) Firstly I would like to know if these problems are linked ...

I NEED TO KNOW HOW TO TIME A350 AJS WHEN TIMEING A 350 1954 AJS MCS IS THE ADVANCE LEVER TIGHT OR LOOSE The lever should be tight and in the middle of it's travel

...Advance Lever if it is stuck? I have tried rolling the sprocket wheel and take up spool manually but it won't advance, any suggestions? Remove bottom cover and check for loose screw jamming the ...