Questions & Answers for: adjust tension drop bobbin singer

...adjust the tension on this drop-in bobbin carrier? My other machine is Singer Model 15 (AL311850), I'm having upper tension problems and the machine is sewing loudly-it's never done that before.

adjust the bobbin tension on a Singer 533....When I use mine..the top thread from the needle is fine but the underside thread is a mess, all tangles etc. Any ideas anyone??? With your slide plate open

...to loosen the screw a tiny bit and it solved my problem. I've been sewing for over 40 years and didn't know how to adjust the tension on a drop in bobbin until now. You learn something new

...may need to pull the thread back and forth lightly to help it settle in the tension discs. Also check the type of bobbin being used. Drop in bobbin machines need bobbins with rounded sides (class

...4 inches. Your bobbin is now spun and threaded. The bobbin has a small screw (if more, you must use trial and error- , But properly the biggest) - that way you adjust the under tension. good ...

adjust tension on top thread when sewing in reverse on sINGER 2250? It's on page 15 of your user's manual. If you don't have one, you can download it free at the Singer Sewing Machine site. That's how

...adjust the bobbin tension. According to the manual, you should not need to adjust the bobbin tension (and I located other sites which stated the bobbin tension cannot be adjusted on this machine). ...

...Adjust the upper tension--either tighten to pull the upper thread toward the top of the fabric, or loosen to pull more upper thread down. Here are some web sites that may help. Sewing Machine Thread ...

...is top loading, drop in. Bobbin Tension How and Why Tension is Adjusted Understanding Bobbin Tension Understanding Thread Tension Threads Sewing Lesson 10 How to Fix Tension on Your Sewing ...

...adjust the tension on the bobbin. When you sew you can see the stitching, if the stitching is pulling the bottom thread up to the top decrease the thread tension. If the top thread is pulling down to ...