Questions & Answers for: adjust tasco binoculars

How to reassemble my lens I need to now how is the configuration of the 3 lenses from the right adjustable view (Where you put the eye to see). forget it

8 X 30 eyepiece has come loose The right-hand adjustable eyepiece barrel has come loose from the lens which screws into the binocular body. It now fits loosely over the lens. How can this barrel be ...

Tasco Offshore 54 binoculars? Up close to the eyepieces under the material that covers the binocs. You have to peel away at the material to get to them, or look for the splice in the material which is

...binoculars i see double one over the other about 20 degrees diagonalcan you help Up close to the eyepieces around the barrels are small screws that you can use to "collaminate" your binocs. ...

...Tasco Binoculars - Limited Lifetime Warranty Tasco Spotting Scopes - Limited Lifetime Warranty Tasco Telescopes - Limited Lifetime Warranty Tasco Microscopes - Limited Lifetime Warranty ...

...adjust the image? Chuck them away and replace them. Seriously. Your binoculars have suffered the most common fault which occurs to all makes and models: a bent or broken eyepiece yoke assembly. If ...

...adjust them or how to do this. Thanks Hello. When the binocs were dropped one of the lenses popped out of it's retaining frame. If this is an old set you can open it up and see what you can do. ...

...Tasco 3087GY Binoculars. The problem is that it feels like you are looking cross eyed when using. Each eye can be focused perfectly independently but when looking with both eyes, it's like you're ...

...an old yellow tasco zip binoculars that got sprayed with water and I can't get to the water drops inside (behind adjustable lens), have ya tried to leave them in a bag of rice for a few days ...

...binoculars have an eccentric ring around the lens under the clamp ring so that can be done. Your Tasco probably does not have that, so look under the covering material on the barrels (it may be stuck ...