Questions & Answers for: adjust power supply voltage plasma

Question about SPN4235 42 in. Plasma HDTV

1 Answer

...power supply board, the VS voltage is marked on the panel inside the set, find the VS test point and the VS adjustment potentiometer. adjust the voltage down at least 10 volts, if your not an ...

Ad

Question about 42PX5D 42 in. Plasma HDTV

1 Answer

...without disassembly, and the proper adjustment of the power supply voltages and the diffusion adjusment of the ysus pwb. This will take a qualified service tech that understands plasma

Ad

Question about PN50A400 50 in. HDTV Plasma TV

1 Answer

...power supply, PN: BN44-00206A It's easy to locate, but requires adjustments once it is installed. Panel voltages must be adjusted according the the specifications of the TV. There is a sticker on the ...

Question about Viera TH-50PZ85U Plasma TV

1 Answer

...power supply went bad, I replaced it with power supply from 46" TV. Image quality seems not as clear as before. Can it be because the power supply is from 46" TV? Check the power supply part no. ...

Question about Viera TH-50PZ85U Plasma TV

1 Answer

I decrease the vs voltage on my Vizio tv I take it you have a plasma? There are pots on the power supply board for adjusting VS and VA. Are you wanting to adjust the voltage due to red snow problems??

Question about Viera TH-50PZ85U Plasma TV

1 Answer

...power supply regulator board. You should be fully aware about these adjustment; I recommend. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with ...

power supply board but 15v supply on the main board disappear when the tv goes int standby mode. Check the fan , it might be over heating . check the voltages printed in the sticker in the back of the

Question about 50 in. Plasma TV

1 Answer

...power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any ...

...power supply board on my plasma tv. Now have a snowy picture on all inputs. Green light on the logic board blinks evenly. No puffy caps. Is there another board that needs to be replaced? After the ...

...adjust and are located on the power supply board. The v-sus and x-sus boards have no adjustments available on them. Adjusting the Va and Vs pots only help marginally..am I out of luck? is my tv ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...