Questions & Answers for: adjust orbit valve

...valve automatically advances to station 2. Timer turns on again, and station 2 starts watering. Orbit resources: http://www.orbitonline.com/support/ ...

orbit #57976 controlller that is showing an "off power" icon. I cannot turn the irrigation on using the controller but can do so manually at each valve station. The fuse is not blown and the

orbit snap wire connector Disconnect the wire at the valve and try again. If no short connect the wire to adjacent valve and see if it shorts out. If no, replace the solenoid. If you still get a short

Just hooked up (water lines only, no control wiring yet) a 3 station Jar top Manifold. One of the valves is open while the other two are shut. Have taken apart and see not apparent reason for it to be

Can this valve be repaired? Orbit 51016 Sprinkler System 3/4-in Brass Anti-Siphon Control Valve Check to see if the company has a rebuild kit for the unit.

how do you change speed on mikita BO5030 orbit sander If there is no adjustment on the trigger or a roller knob its not adjustable.

I can't adjust the rotation on a orbit 3 sprinkler. It is gear driven. https://www.youtube.com/watch?v=vT6bopOZK3A Waste my time....the head moves all the way around and cannot be adjusted.,

...Orbit irrigator, after 2 hrs it was still running. turned controller to off water continued to run. Pushed reset water still runs what now? Sounds like your zone valve is stuck in the open ...

4 Station Easy Orbit timer not turning on the valve. Check fuse https://support.orbitonline.com/en_us/how-to-troubleshoot-a-timer-not-operating-valves-HkonCd9hP