Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...adjust the tension on the belt the belt is to loose when I engage the mower function there is not enough tension to move the blades I followed the belt diagram to a T. Is there a way to adjust the ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
riding lawnmower older Craftsman 143406012 12hp searches for rpm/ riding lawnmower older Craftsman 143406012 12hp tecumseh keeps searching/surging . rebuilt carb and adjusted governor, still searching
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
How do I adjust blade drive belt tension on Craftsman G4000 riding mower/tractor? Belt was excessively worn and after replacement and adjustments made all ran well. Thnaks.
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...on a jack or ramps and lower the deck. There should be adjusters on the pulleys which hold the belt on. Loosen these, then put on the new belt and use pulley tensioners to adjust the belt
Question about 20 hp 42 in. Deck Yard Tractor
...Belt could be slipping or worn. See "How To Check And Adjust The Clutch" and also "How To Adjust The Speed control ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
ADJUST THE CUTTING BLADE TENSION OF THE MOWER BELT. There is no adjustment on the Craftsman mower belt tension. The tension is maintained by a spring. If the belt is to loose you either have the wrong
Question about YT 4000 42" Briggs Stratton 24 hp Gas Powered Riding Lawn Tract
...belt then adjust the belt tensioner to apply more pressure on the belt. Also check the tensioner pulley as I have found that they split in two and the belt becomes loose as a result. Hope this ...
Question about My First Craftsman Tractor Ride-on
Craftsman riding lawnmower, model #917 259012 hydrostat stopped working mower won't move when engaging the hydrostat Check belts. Check transmission fluid level if possible. Check linkage between ...
Question about My First Craftsman Tractor Ride-on
adjust belt tension on some models whether it is by the cable or a slotted bracket where the idler wheel is mounted, depends on make and model. If you have your manual check in it for belt adjustment.
Question about My First Craftsman Tractor Ride-on
...belt on my craftsman lt 2000 riding lawnmower mo 247.288841 42 inch deck .But now when I tried it it worked fine going slow but when I tried to go fast it goes slower please help. Go back and check ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions