Questions & Answers for: Chevrolet 1500 how to adjust

transmission shifts hard and at high rpms all the way up to OD. Just had a cable adjusted also. Maybe the detent cable wasn't adjusted right. you have to adjust it by hand at the throttle under the ...

transmission linkage adjustment how do you adjust the transmission linkage on a 1996 k-1500 ?? the linkage should have an adjustment srcew on it turn it usually clockwise until you get the desired ...

...chevy 350 tbi how do i ajust my valves and lifters on a chevy 350 tbi they are hydralic and are not adjustable during normal maintenence if you removed heads then you need to adjust them if they are ...

i need the engine valve spec for a 1984 chevy 6.2 diesel. We are adjusting the valves. VALVE ADJUSTMENTS All gasoline and diesel engines in this guide use hydraulic valve lifters, which require no ...

trying to replace automatic adjusters on rear brakes for a 1997 chevy z-71 k1500...the hole in the adjuster pivot point is too big for the mounting pin...what am i doing wrong? you might have the ...

how to adjust rear brakes on 1993 chevy k1500 4x4 should be a regular break shoe setup, there should be a hole in the backing plate to adjust with a screwdriver but i find it's better to pull the ...

...in to get an alignment bu they told me they could do a proper alignment because the part that they adjust to alignt the tires is maxed out. they said the only thing i can do is take the after market ...

...on a 1991 chevy 350 i need to know how to torque the rocker arms properly i need to know how to adjust the valves on 02 pont sunfire sorry late had to find my chevrolet V8 valve  rocker arm ...

1996 vortec 5.7. how do I adjust rocker arms when the motor is cold? Installed head gasket. Can't get it to start but rocker arms still need to be adjusted these are adjusted the same way 5.7 litre ...

hydraulic valve adjustment how do I adjust hydraulic valve lifters on a 5.7L engine The lifters are not supposed to be adjusted. Each lifter is a small "engine" itself. They are supposed to be ...