Question about M4097DVRS Path-Through Scanner, Flatbed Scanner
...ADF cover open. Could anybody tell me where the sensor is located and/or any other information, test or solution for it? Sincerely ET This may help: I don't have a Fujitsu, but a M/F is a M/F, all ...
...ADF cover doesn't closed and it giving us error U2O if someone can help us............thank you U20 indicates the ADF cover is open, look to see if something is preventing the ADF cover from closing, ...
...you press on this arm, it should move freely up and down If the arm is stuck down, please contact Technical Support for troubleshooting options Close the ADF cover. DOCUMENT TRAY DOES NOT TAKE ...
Question about LaserJet 3055 All-In-One Printer
...ADF cover plate. Remove any jammed media with care.Take out the page gently. NOTE: Take care not to tear the paper. Close the ADF cover plate. Clear the jammed media from ADF (HP LaserJet 3390, 3392, ...
...ADF, then open the Feeder Cover. Remove the jammed page from under the roller to the Feeder Cover side. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed ...
...ADF, then open the Feeder Cover. 3. Raise the paper release lever (A) then remove the jammed page from under the roller to the Feeder Cover side. 4. Open the Document Cover and pull out the document ...
...ADF paper chute),Guide P ASSY (Sheet guide), Feed roller cover (plate guide) and Brake roller cover installed correctly? 4. Clean the Feed rollers, Eject rollers,Plastic rollers, glass surface and ...
ADF cover open message not clearing When I open and close the ADF cover and press the stop/exit button to clear the error is not cleared from the machine. Is this a broken sensor? it might be a broken
...ADF Cover" and solution is Close the cover of the ADF Ho risolto cosi al " Errore Sportello aperto 005-301 - Chiudere ADF cover". Sollevate il coperchio piccolo dello scaner, all'interno c'? una ...
ADF cover is open The error indicates that the ADF cover is open, though it is totally closed. At first I ignored the error because when I opened & closed the ADF cover it comes back to normal, but ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions