Questions & Answers for: add ice maker old fridge

...Add shims in the back if floor is not level from front to back. 5. Refrigerator is touching wall or cabinets. See your owner's manual for space requirements. * Snapping or clicking sound. If your ...

...ice maker. If you have a water softener, your cubes will always be a bit cloudy, since the added salt slows down the freezing slightly and thus the cubes get cloudy. That said, there are a few things ...

...ice cube. The white particles are not toxic. And some people even say that to claim this is happening that digital photos of this happening is worth more than a thousand words. I would also like more ...

add fans for air flow and eventually a defrost circuit to make the first "frost free" models. Now today top freezer models actually only make up a very small portion of the retail industry with bottom

...ice out at the top a little pressure with a turkey baster will usually clear it out. Flushing it out with hot water and clorox may help. Make sure it drains quick enough to prevent refreezing. . The ...

...ice receiver. I have had our local AEG technician look at it and he says that there is a micro leak in the gas system. For this reason he believes it will not reach icy temperatures. I am not sure if ...

...add that the fan does run and the ice maker works fine too. One last thing, the fan housing inside the freezer is covered with a heavy layer of ice but has not formed on the top or side vent panels. ...

...ice or just gunk has blocked you defrost drain. Unplug and then remove the rear panel in back of freezer. We need to see if the water is overflowing the condensate drain tray or if the blockage is in ...

...ice maker problem? Now the freezer isnt getting to temp so maybe the water damaged something there? Add to it there is only ONE authorized servicer in town -- I am talking multiple city area-- and ...

...ice builds up behind the panel at the back of the freezer compartment, eventually clogging the ducts that send cool air into the fridge part. It's been a little over a week now since I've done the ...