Questions & Answers for: add freon high side low

Question about 1998 Cutlass

1 Answer

...Freon do I add 2.Where is the low side valve located- It lloks like it is the front with a red cap. 3.What type of connection is need to add the freon - I purchased a can and hose but the hose ...

Ad

Question about 1999 DeVille

1 Answer

...freon please advise the correct line to add freon to my 1999 cad deville add freon to low pressure side . low pressure side is large line with small fitting. high pressure line has a large

Ad

Question about 1999 Amigo

2 Answers

add the freon to my 98 Isuzu Amigo, and I am not sure which one it is that I use? You need to add the freon on the low side which is usually indicated by a blue cap. The red cap is the high side port.

...add freon, you have a leak, and you have moisture in the system, the leak should be located, mositure removed, then freon added. But to answer your question. Open the hood on, the left side you will ...

...ADD FREON you need to add a valve to the low side line. But if you have a leak that indicates that moisture is in the unit and you need to pull a valum to remove the moisture before ADDING ANY FREON. ...

...add freon to 1999 mercury grand marquis need to add freon cannot tellwhich side is high or low the low side has the larger tubes and the ports are different sizes so you can't put it on the wrong ...

...have gotten into lines and will have to vacuum system if system is short cycling [compressor going on and off ]and at 70 # add more freon slowly and bring up the rpm on vehicle a little about 1000 ...

...add freon On a 2002 Mitsubishi Montero LTD, the a/c charging port is between the battery and the windshield. It is the port that has a cap labeled with an "L" (Low Side). When the a/c is on, "L" (Low ...

...side should drop below zero then climb to 60 or 80 psi as you add freon. You would need to jumper the low pressure switch to engage the compressor clutch to add freon. The compressor must be

add freon to my 2003 Mitsubishi Eclipse GTS and I was unsuccessful. Was told I needed a new expansion valve. Could there be something else causing it not to recharge? Were you using just a charge hose

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...